The Magna Shine Ceramakote is cutting-edge surface protection kit that is pioneering the science behind next-generation protective automotive coatings. The revolutionary clear, nano-molecular crystalline coating protects your vehicle from the elements and harmful UV rays for years!
This advanced hydrophobic formula will repel water, street film, brake dust, dirt and other contaminants from your vehicles’ treated surfaces.
Ceramakote Nanoquartz "9H" formula is designed to apply easily, creating a deep-gloss finish and providing your automotive paint, wheels and other non-porous trim with the ultimate protective coating. Unlike standard waxes and paint sealants, longevity is measured in years, not months!
Please follow directions carefully to ensure correct results:Thoroughly wash vehicle using a cleansing detergent free of oils and synthetic waxes. Dry thoroughly. After washing, remove all embedded contaminants with a clay bar or similar product.
Polish any swirls or scratches in the paint using your favorite wax-free surface prep compound and/or polish. IMPORTANT: Imperfections in the paint can be amplified if not correctly removed.
Using a spray bottle, mist the surface with at least a 70% Isopropyl alcohol and water mixture. It is important to completely strip the paint of any residue AND previously applied waxes and sealants, natural oils and greases. A high pH soap is recommended to remove oils, greases and fillers. The coating must bond to the paint to be effective!
Apply 2-3 thin beads of Ceramakote product directly onto the included applicator (Wear protective gloves). Apply to one panel at a time – in the same direction as to avoid smearing. Do NOT use on windshields.
Wipe/Buff the applied area no later than 3-5 minutes after application. REMOVE COMPLETELY WITH INCLUDED MICROFIBER TOWELS to minimize the risk of hazing and shadowing.
Allow 60-90 minutes for coating to cure before driving or touching vehicle. (May take 24 hours to completely cure). Full curing will take 3-5 days depending on weather and climate conditions.
Wait at least 120 minutes for initial cure before applying additional coats of Ceramakote!
Contents includes a 1 oz. bottle of Ceramakote, 3 precision coating applicators, an edgeless microfiber towel, and 1 pair of disposable gloves.